INSTRUMENTATION CABLES, THERMOCOUPLE EXTENSION TYPE UN-ARMOURED / WIRE ARMOURED, UN - SIDELDED / OVERALL / INDIVIDUALSIDELDED
Applications :
Can be used for instrumentation/process control in chemical and petrochemical industries and are required to transfer reference junction to the control room.
Specifications :
As per ANSI MC 96.1
PACKING : In Wooden Drums of 500/1000 Meters.
Thermocouple Tolerance
1) Tolerance is referred to as the maximum allowable deviation between hot junction temperature and the temperature derived from the EMF table.
2) ASTM temperature is C or % value for the measured temperature, which is greater.
3) | t | is the measuring temperature indicated by the temperature irrelevant to the symbol + or -.
4) Class 1, 2, or 3 conforms to the old JIS Class 0.4, 0.75 or 1.5, respectively.
5) JIS Standard is identical with IEC, BS or DIN Standard except for a part.
6) The tolerance of JISC1605 and JISC1602 is completely the same.
7) ASTM Standard is same as the old ANSI Standard.
8) Tolerances given in this table apply only to new wire as delivered to the user and do not allow for changes in characteristics with use. (ASTM E230)
9) The standard tolerances shown do not apply to Type E mineral-insulated, metal-sheathed (MIMS) thermocouples and thermocouple cables as described in Specifications E608/E608M and E585/E585M. The standard tolerances for MIMS Type E constructions are the greater of 2.2°C or 0.75 % from 0 to 870°C and the greater of 2.2°C or 2 % from -200 to 0°C.
Thermocouple Standard
Thermocouple Troubleshooting
